A+ Electrical Safety Equipment is a nationwide distributor, specializing in personal protective equipment, commonly known as "PPE", that complies with OSHA regulations and NFPA 70 standards. Feel free to browse through our wide variety of personal protective equipment (PPE) products.

Home : Electrical Safety Equipment : Rubber Insulating Gloves, Protectors & Sleeves Rubber Insulating Gloves, Protectors & Sleeves Insulating Gloves & Glove Kits Available in Class 00, 0, 2, 3, and 4 Many styles, lengths and colors Class 00, 0 and 2 are also available in kits: Glove, Glove protector and glove bag See glove bags, glove inspection products, glove & hand cleaners and powder under Glove Accessories Proper fit is important to minimize chafing and fatigue. To determine glove size, measure the circumference around the palm. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners ASTM Labeling Chart (printable) Glove Protectors Leather protector gloves should always be worn over Rubber Insulating Gloves to provide the needed mechanical protection against cuts, abrasion and punctures WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death could result. Always use proper rubber insulating gloves Proper care of leather protectors is essential to user safety. Inspect them for metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves It is the responsibility of the purchaser to specify the overall length of the protector gloves. The clearance table below shows the minmum distance which shall be allowed between the top of the protector glove cuff and the end of the bead of the rubber glove per ASTM F496 Specifications Class 00, 0 1/2" Class 1 1" Class 2 2" Class 3 3" Class 4 4" Glove Liners For year round use, liners provide warmth in cold weather, while they absorb perspiration in the warm months. Open end and knit wrist styles. Knit wrist styles grip the wrist rather than allowing the cuff to roll down and bunch at the palm Many fabrics available One size fits all Rubber Insulating Sleeves Rubber insulating sleeves extend coverage of the arm from the cuff of the rubber insulating glove to the shoulder, fully protecting these areas from accidental contact with energized conductors and equipment. These sleeves feature a reinforcing fold at the cuff. This cuff is preferred over a rolled bead because it adds less bulk to the cuff and fits into the glove easier without pushing Offered are two manufactured styles: Dipped and Molded Both styles meet current requirements of ASTM D1051 and offer the same high quality of protection SALPOL ,Work, Driver & Lineman Work Gloves Our SALPOL Gloves, Workgloves, Drivers Work Gloves and Linemen Work Gloves are made of the tough materials needed for the demands of today's workforce Glove & Sleeve Accessories Glove bags Sleeve bags Glove inspection products Glove & hand cleaners Glove powder Home : Electrical Safety Equipment : Rubber Insulating Gloves, Protectors & Sleeves