A+ Electrical Safety Equipment is a nationwide distributor, specializing in personal protective equipment, commonly known as "PPE", that complies with OSHA regulations and NFPA 70 standards. Feel free to browse through our wide variety of personal protective equipment (PPE) products.
Sorry, there is no product matching the specified productid. Please
click here to go to the APlusSafety.net home page.
Size
Galvanized Roof Anchor
Code:PRO AJ770A
5,000 lb anchorage point
Forged alloy D-ring
16 gauge galvanized sheet metal
Also available in boxes of 5 (Code PRO AJ770A-5)
Reusuable Roof Anchor
Code:PRO AJ730A
Forged alloy D-ring
Painted steel construction
Includes 20 16d nails for single use
Standing Seam Anchor
Code:PRO AJ775A
Specially designed for attachement to metal roofs. The device is tightened onto standing seams via an adjustable wrench and is designed to hold a self-retracting lifeline (not included) that attaches to the worker. The device will not damage roofs and can be installed on sloped or flat roofs
Painted steel construction
Swivels 360 deg
Adjustable for metal roof seams from 24" to 36" apart
Leg extensions lock into place with attached pins
Must be used in conjunction with a Protecta Self-Retracting Lifeline (sold spearately)
Will fit up to 50' SRL
Meets falls arrest requirements of OSHA 1926.500 Sub Part M
Ridge Runner Anchor
Code:PRO AJ785A
This roof system offers a quick and safe way of providing fall protection for personnel working on roofing projects, especially when working near a leading edge. Must be used in conjunction with a self-retracting lifeline (not included). Should a fall occur the SRL will limit the fall to inches
Painted steel construction
Provides 360 deg of movement
Offers up to 50' radius for peforming hands-free roof work(fits up to a 50' SRL)
Folds up for easy transport and storage
Included anchors accommodate rafters and trusses up to 1-1.2" thick and 12" wide thru 1-1/2" hole rilled into the deck
Engineered system meets fall arrest requirements of OSHA 1926.500 Sub Part M
Pan-Pro Anchor
Code:PRO AJ783A
Made exclusively for pan deck workers. The Pan Pro installs through a 3" hole drilled in wooden pan deck. Can be used with a variety of fall protection products and self-retracting lifelines, shock absorbing lanyards and rope grab systems, or as anchor points for a temporary horizontal lifeline system
Painted steel construction
Red powdercoated protects from corrosion
Tightens by hand
Accommodates 4x4 and 4x6 trusses
Roof Runner Anchor
Code:PRO AJ782A
Installs in a 3" hole drilled adjacent to a rafter or truss. It can be used individually with a self-retracting lifeline, shock absorbing lanyard, or a rope grab system, or as anchor points for a temporary horizontal lifeline system
Painted steel construction
Accommodates trusses up to 1-1/2" thick and up to 12" wide
Meets falls arrest requirements of OSHA 1926.500 Sub Part M
