|
|
Electrical Safety Equipment
|
|
- A+ safety offers 7 levels of Arc Flash Protection: 7.9, 11, 20, 31, 40, 75 and 100cal/cm2. These items are available individually or as complete kits.
- All clothing is Indura® Ultra Soft material and meets current ASTM F1506 and NFPA 70E requirements.
- From our 10cal/cm2 Arc Shield to our 100cal/cm2 suit you'll find everything you need in Arc Flash Protective Clothing
Free Arc Hazard Calculator
|
|
|
- GLOVES: A+ Safety offers a wide range of rubber insulating gloves, sleeves and protectors to 40kv. Class 00 and 0 gloves are available in Type I natural rubber and Type II ozone resistant rubber. All gloves, protectors and bags are available as individualy items, while Class 00, 0 and 2 are also available in kits. All gloves come in sizes 8-12 including half sizes, except Class 4 which comes in whole sizes 9-12. All gloves meet or exceed ASTM D120
- PROTECTORS: Leather protector gloves are available in various styles to meet different demands. Class 0 and 00 protectors are available with non-metallic buckle and pull strap or elastic wrist. Class 1-4 protectors come equiped with a non-metallic buckle on the pull strap and an extra wide leather reinforcement over the thumb seam. Protectors are dual sized
- GLOVE LINERS: Liners reduce the discomfort of wearing rubber gloves in all seasons. Many styles and fabrics are available with either an open or knit wrist
- LINEMEN'S SLEEVES: Offered are both dipped and molded stlye sleeves. Both meet the current requirements of ASTM D1051. Various colors, angles and sizes are offered as well as accessories
- SALPOL & WORK GLOVES: Salpol gloves, drivers gloves and linemen work gloves each designed for specific use
- ACCESSORIES: Glove and sleeve storage bags,glove inspection products, hand & glove cleaner and powder.
|
Proper fit is important to minimize chafing and fatigue. To determine glove size, measure the circumference around the palm. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners
|
ASTM Labeling Chart (printable)
|
|
|
- A+ Safety offers various styles of Dielctric Footwear to meet every application.
- All are 100 % waterproof
- ASTM Dielectric Footwear
- Super Dielectric Over the foot
- Super Dielectric deep heel overshoes
- Super Dielectric overshoes
- Dielectric overshoes
|
|
|
- The Arc Resistant PVC Nomex® Utility Rain Suit, the Arc Resistant PVC Nomex® / Kevlar® Utility Rainsuit and the Arc Resistant PVC Nomex® Economy Rain Suit all comply with ASTM F1891-99 and ASTM D64B-99 standards
- The PVC Nomex®: / Kevlar® Rain Suit also meets Class 3 ANSI/ISEA 107-1999 Standard for High Visibility Safety Apparel
- Our OcculuxTM High Viz Outerwear meets the exacting requirements of EN 471, ANSI 107-1999 and ASTM F1671. Choose a 4-in-1 coat & vest, a heavyweight coat, or a lightweight coat
|
|
|
- Our Insulating Blankets with eyelets, without eyelets, or slotted with eyelets and are available in Class 2 & 4. These blankets come in Type I natural rubber or Type II which is a highly flexible, corona-resistant polymer with excellent aging and weathering qualities
- Class 0 Lo-Voltage Insulating Blankets are Type I. Class 4 Primary Insulating Blankets are Type II
- We also offer many accessories for fastening and protecting our insulating blankets.
|
|
|
- Protect your workers from lo-voltage electrical hazards with our Insulating Shielding material on a roll. Made from high strength fabric reinforced Type II rubber, workers can custom-cut from the roll to fit each application
- Blankets are highly puncture & tear resistant, flame (self-extinguishing), oil and ozone resistant
- Color coded for Class and voltage
- Or choose our 7.5kv Class 1 clear PVC roll that permits complete visibility while providing the necessary insulating properties meeting ASTM F1742 standards.
|
|
|
- Arc Suppression Blankets are used as a barrier for protection from the explosive and incendiary effects of electrical arcs and flashes. They can be used for worker protection in underground vaults, switchyards and other locations where there is a potential of exposure to explosive electrical discharges.
- A+ Safety offers Arc Suppression Blankets in a plain style which can be attached by using blanket clamp pins, or blankets that are fitted with strong straps and carabiners.
- CAUTION: Because of the unpredictability of electrical discharges, the Arc Suppression Blanket may not totally contain arcs and flashes, but only reduce or limit exposure and incendiary effects. In such cases, injuries may still occur, even when the blanket is properly used.
|
|
|
Switchboard matting is permanently placed in front of switchgear, motor control centers and other high voltage apparatus to provide personal protection for workers- A+ Safety offers 4 styles of Switchboard Matting
- Style M is a 1/4" thick corrugated high-quality rubber tested to 20kv to comply with ASTM D178 Class 2 specifications. With a max use voltage of 17kv, it is available in 2', 3' or 4' widths and up to 75' lengths
- Style 702 is a corrugated vinyl compound, 1/4" thick, with a dielectric strength of 30kv and max use volatge of 17kv. Conforming to ASTM D178-93, Type II Class 2 specs, this is also available in 2', 3' or 4' widths and up to 75' lengths
- Style 711 is smooth surfaced, 1/8" thick, meeting Military Spec 15562-F Amend.3 Type III. With a dielectric strength of 30kv and proof tested to 15kv, this matting is available in a 3' width and up to 75' lengths
- Style 712 has a diamond plate surface and meets Military Spec 15562-F Amend.3, type III. The 712 is gray, 3/16" thick and comes 3' wide and up to 75' lengths
Also offered is our URD/Switchboard Blanket
|
|
|
OSHA mandate: When working on 50 volts ac or more to ground, insulated tools must be usedA+ Safety offers 1000 vac rated hand tools that have been tested to 10000vac- Manufactured & tested to ASTM-1505-94 and IEC90 Standard
- Flame retardant, with a working range of -40o F to + 175o F
- Double insulated to provide maximum worker safety. A first hi-visibility yellow layer provides the insulation for the tool, and the outer hi-visibility orange layer protects the lower yellow layer.
- NOTE: If the yellow layer can be seen through the orange layer, the tool should be removed from service.
- These tools are also available in a wide variety of kits. See Tool Sets & Kits.
|
|
|
Manufactured from braided, military grade fiberglass composite over a tough polymer core, Composite Tools combine the latest in space age technology with traditional heat treated steel tips in a unique family of products ideal for the safety-minded professional- Inherent safety-the insulating properties are built into the tool, not coated onto it
- Lightweight
- Better balanced
- Exceeds ASTM torque standards
- Exceeds the strength of the proper fastener
Tools are also available in a variety of kits. See Insulated Tool Sets & Kits.
|
|
|
- A+ Safety offers Tool Sets, Kits and Rolls with Double Insulated Tools, Composite Tools and combinations of both.
- Super MRO kits
- Hot Box w/ composite tools
- Electricians kits, Telcom kits, Maintenance kits, Meter service rolls, Meter reader rolls, Gas service rolls, Wrench sets, Screwdriver sets, Nutdriver sets and more
- Verizon kits and tools
|
|
|
- A+ Safety offers Non-Sparking Tools for use in facilities where flammable vapors or combustible residual materials exist.
- These tools are made of aluminum bronze and are double insulated. A hi-visibility orange layer over a hi-visibility yellow layer.
- Tools are non-magnetic and corrossion resistant.
- NOTE: If you can see the yellow layer through the orange layer the tool should be removed from service.
|
|
|
There are a variety of Fiberglass Reinforced Plastic(FRP) constructions used for hot sticks, including foam filled tubular sticks used for all products requiring solid construction. Other product applications require hollow tubular sections. Both of these processes meet ASTM F711 Standard for FRP and tube used in live line tools
Hot stick production is 100 % electrically proof tested. Hot stick blanks must pass a test of 100KV/12" for 5 minutes without detectable heating prior to being acceptedIncluded in our Hot Stick Section:- FRP Clampsticks (shotgun)
- Telescoping Hot Switch Sticks
- Universal Swicth Sticks
- Fiberglass Hot Switch Sticks
- Insulated Rescue Hooks
- Static Discharge Sticks
- Hot Stick Accessories: Lineman's Hoists, Storage, Universal Fittings
|
|
|
Lockout / Tagout is a MUST to be in compliance with OSHA's Electrical Safety Related Work Practices: OSHA 1910.331 thru 1910.335 and 1910.339 - Lockout/Tagout Training Programs, Videos and Compliance Manuals
- Safety Lockout Hasps and Padlocks
- Lockout Tags,
- Lockout Stations & Lock Boxes
- Breaker & Fuse Lockouts
- Plug and Switch Lockouts
- Cable Lockout System
- Pneumatic, Ball Valve and Gate Valve Lockouts
- Lockout/Tagout Kits
|
|
|
Home : Electrical Safety Equipment
|
|
About Us -
Products -
Specials -
Contact
Arc Flash Clothing -
Dielectric Footwear -
Switchboard Matting -
Arc Suppression Blankets -
Hot Sticks -
Rubber Insulating Gloves -
Electrical Safety Equipment -
Compositools / Composite Tools -
GFCI / Ground Fault Circuit Interrupter -
Safety Mats -
Megohmmeter -
Ball Valves -
Insulated blankets -
Insulated tools -
Lockout/tagout -
Fall Protection -
Full body safety harness -
Lanyards -
Carabiners -
Arc Flash Hazard Labels -
mike@aplussafety.net
|
