Pressure Terminal Clamps

Duckbill and C grounding clamps feature pressure terminations for use with plain
ferrules. Made of high strength aluminum and bronze eye screws, these Grade 5
clamps are designed for smooth operation and long service life and are available
with smooth jaw or flat jaw. The flat jaw also features a hardened aluminum alloy
serrated insert designed to grip tightly to flat surfaces and cut through surface
contamination and oxidation for low resistance contact. The pressure termination
is designed on a angle keeping the cable out of the way during installation. The
cable termination is angled to minimize interface with the "T" handle or eye when
installing or removing the clamp.

Aluminum, 1.1" clamp - spring loaded - "V" thread: *ASTM Grade 5, Class A, smooth jaw *Main line range 795 KCM to #6 *1.1"-.146" (28mm-4mm) diameter *400 RMS amps, 60Hz	Codes
Duckbill eye without strain relief sleeve	SAL 24404
Aluminum, 1.25" smooth jaw clamp -pring loaded - Acme thread: *ASTM Grade 5, Class B, serrated jaw *Main line range 1035 KCM ACSR to #6 *1.26"-.06" (32mm-15mm) diameter *400 RMS amps, 60Hz	Codes
"C" type, eye without strain relief sleeve	SAL 24466
Duckbill, stick mounted	SAL 24407
Hanger stud only	SAL 21754
Aluminum, 2" smooth jaw clamp - spring loaded - Acme thread: *ASTM Grade 5, Class B, serrated jaw *Main line range 1035 KCM ACSR to #6 *1.26"-.06" (32mm-15mm) diameter *400 RMS amps, 60Hz	Codes
"C" type, eye without strain relief sleeve	SAL 21942
Aluminum, flat jaw clamp _ Acme thread: *ASTM Grade 5, Class B, serrated jaw *Main line range 1.5"-.06" flat or square *1.26"-.06" (32mm-1.5mm) diameter *400 RMS Amps, 60Hz	Codes
"T" screw without strain relief sleeve	SAL 24405
Eye screw without strain relief sleeve	SAL 24406