Clamps for Flats, Angles and Rounds

Flat jaw grounding clamps are available with either a large "" handle or with an
eye for clampstick applications. The handles and eyes are designed so that the
cable will not interfere with the torquing of the clamp. The set screw that secures
the clamp to a flat surface is located on the movable jaw on all designs. When
tightened, the set screw forces the fixed jaw of the clamp firmly against the flat
ensuring a consistent low resistance current path directly through the body of
the clamp to the cable connection.  

Clamps for flats and angles: heavy duty "C" type flat jaw clamp woth anti-blow off
keeper is made to fit structural angles, flats and copper or cooperweld stranded
grounding assemblies. To install, first use an abrasive cloth or wire brush to clean
the surface to be clamped. Then wipe the surface clean, position the clamp, finger
tighten and set the screws. Use a wrench to secure and tighten. A 2667 clamp
with contact stud offers greater versitility  

Grade 3 bronxe flat jaw clamp - "V" thread: *ASTM Grade 3, Class B, serrated jaw *Main line range 1.5"-.06" flat or square *1.26-.06" (32mm-1.5mm) diameter *300 RMS amps, 60Hz	Codes
"T" with strain relief sleeve & "T" screw	SAL 1814
Eye with strain relief sleeve & eye screw	SAL 1815
Grade 5 aluminum flat jaw clamp - "V" thread: *ASTM Grade 3, Class B, serrated jaw *Main line range 1.5"-.06" flat or square *1.26-.06" (32mm-1.5mm) diameter *400 RMS amps, 60Hz	Codes
"T" with strain relief sleeve & "T" screw	SAL 4345
"T" with strain relief sleeve & "T" screw. angle	SAL 24442
Eye with strain relief sleeve & eye screw	SAL 4369
Eye with strain relief sleeve & eye screw, angle	SAL 24441
ASTM Grade 5, Class B, serrated jaw: *Angels & flats: 2.5"-4" WX (64-101 X 3-19mm) *Rounds: .25"-.75" (6-19mm) diameter *Tap size: 5/8-11UNC *Maxium cable size 4/0 Type V *Compression ferrules	Codes
With strain relief sleeve, 5/8"- 11NC connection	SAL 2567
2567 clamp and contact stud	SAL 2667
ASTM Grade 6, Class B, serrated jaw: *Angels & flats: 2.5"-4" WX (64-101 X 3-19mm) *Rounds: .25"-.75" (6-19mm) diameter *Tap size: 3/4-11UNC *Maxium cable size 250 MCM Type V *Compression ferrules	Codes
With strain relief sleeve, 3/4" - 10NC connection	SAL 2667