Tel: (352) 326-0200     Toll Free 800-334-1573     Email: mike@aplussafety.net     Fax (352) 326-0201


"C" Type Clamps

"C" type grounding clamps are available in bronze or aluminum and come with or
without strain relief sleeves. Some are also available as stick mounted (1.25" x 6'
fiberglass hot stick permanently mounted to clamp).

*Sizes 477 MCM, 1", 1.25", 1.5", 2" and 2.4"
*Hanger studs for "C" clamps

Bronze, 477 MCM with curved
lower jaw - "V" thread:
*ASTM Grade 3, Class A, smooth jaw
*Main line range 477MCM 18x1 ACSR to #8
*.81-.12" (21mm-3mm) diameter
*300 RMS amps, 60Hz

Codes

 4200.jpg
Eye with strain relief sleeve SAL 4200
Eye without strain relief sleeve SAL 21067
Hanger stud only SAL 2093

Bronze, 477 MCM with curved
lower jaw - "V" thread:
*ASTM Grade 3, Class B, serrated jaw
*Main line range 477 MCM 18x1 ACSR to #8
*.81-.12" (21mm-3mm) diameter
*300 RMS amps, 60Hz

Codes

 4260.jpg
Eye with strain relief sleeve SAL 4260
Eye without strain relief sleeve SAL 21068
Hanger stud only SAL 2093

1" Aluminum, Acme thread:
*ASTM Grade 5, Class A, smooth
upper jaw with flat lower jaw
*Main line range 795 MCM 26
x7 ACSR to # 8
*1.12"-.12" (25mm-3mm) diameter
*400 RMS amps, 60Hz 

Codes

 2531.jpg
Eye with strain relief sleeve SAL 2531
Eye without strain relief sleeve SAL 2532
Mounted with strain relief SAL 2533

1" Aluminum, Acme thread:
*ASTM Grade 5, Class B, smooth
upper jaw with flat lower jaw
*Main line range 795 MCM 26
x7 ACSR to # 8
*1.12"-.12" (25mm-3mm) diameter
*400 RMS amps, 60Hz

Codes

 4388.jpg
Eye with strain relief sleeve SAL 4388
Eye without strain relief sleeve SAL 4389
Hanger stud only SAL 2537
1" Bronze, Acme thread:
*ASTM Grade 5, Class B, smooth jaw
*Main line range 795 MCM 26
x7 ACSR to # 8
*1.12"-.12" (25mm-3mm) diameter
*400 RMS amps, 60Hz

Codes

 9985.jpg
Eye with strain relief sleeve SAL 9985
Eye without strain relief sleeve SAL 2937
Mounted with strain relief SAL 4280
1" Bronze, Acme thread:
*ASTM Grade 5, Class B, serrated jaw
*Main line range 795 MCM 26
x7 ACSR to # 8
*1.12"-.12" (29mm-3mm) diameter
*400 RMS amps, 60Hz

Codes

 4187.jpg
Eye with strain relief sleeve SAL 4187
Hanger stud only SAL 2537
1" Bronze -T/eye Acme thread:
*ASTM Grade 5, Class A, smooth jaw
*Main line range 795 MCM 26
x7 ACSR to # 6
*1.12"-.16" (29mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 4242.jpg
"T" with starin relief sleeve
and "T" eye screw		 SAL 4242
1" Aluminum -T/eye Acme thread:
*ASTM Grade 5, Class A, smooth jaw
*Main line range 795 MCM 26
x7 ACSR to # 6
*1.12"-.16" (29mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 9993.jpg
"T" with starin relief sleeve
and "T" eye screw		 SAL 9993
1.25" Bronze - Acme thread:
*ASTM Grade 5, Class A, smooth jaw with flat lower jaw
*Main line range 1035 KCM ACSR
t0 #6 
*1.26"-.16" (32mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 9984.jpg
Eye with strain relief sleeve SAL 9984
Eye without strain relief sleeve SAL 1897
Hanger stud only SAL 9983
1.25" Bronze - Acme thread:
*ASTM Grade 5, Class A, smooth jaw with curved lower jaw
*Main line range 1035 KCM ACSR
t0 #6 
*1.26"-.16" (32mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 4255.jpg
Eye with strain relief sleeve SAL 4255
Eye without strain relief sleeve SAL 21069
Hanger stud only SAL 9983
1.25" Bronze - Acme thread:
*ASTM Grade 5, Class B, serrated jaw with flat lower jaw
*Main line range 1035 KCM ACSR
to #6 
*1.26"-.16" (32mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 4279.jpg
Eye with strain relief sleeve SAL 4279
Eye without strain relief sleeve SAL 21070
Hanger stud only SAL 9983
Eye with strain relief sleeve SAL 24410
Hanger stud only SAL 1928
1.5" Aluminum - Acme thread:
*ASTM Grade 5, Class B, serrated jaw with flat lower jaw
*Main line range 1431 KCM ACSR
to #6 
*1.5"-.16" (38mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 1895.jpg
Eye with strain relief sleeve SAL 1895
Eye without strain relief sleeve SAL 2195
Mounted with strain relief sleeve SAL 1896
"T" with strain relief sleeve SAL 21099
Hanger stud only SAL 1928
2" Aluminum - Acme thread:
*ASTM Grade 5, Class A, smooth jaw with curved lower jaw
*Main line range 3000 KCM ACSR
to #6 
*2"-.16" (51mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 21074.jpg
Eye with strain relief sleeve SAL 21074
Eye without strain relief sleeve SAL 21075
Hanger stud only SAL 1928
2" Aluminum - Acme thread:
*ASTM Grade 5, Class B, serrated jaw with curved lower jaw
*Main line range 3000 KCM ACSR
to #6 
*2"-.16" (51mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 20882.jpg
Eye with strain relief sleeve SAL 20882
Eye without strain relief sleeve SAL 21077
Hanger stud only SAL 1928
2.4" Aluminum - Acme thread:
*ASTM Grade 5, Class B, serrated jaw with curved lower jaw
*Main line range 2.4" to #6 
*2.4"-.16" (61mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 4377.jpg
Eye with strain relief sleeve SAL 1923
Eye with strain relief sleeve
& oval eye		 SAL 4377
Eye without strain relief sleeve SAL 4240
Mounted with strain relief sleeve SAL 1924
Hanger stud only SAL 1928
2.4" Aluminum - Acme thread:
*ASTM Grade 5, Class B, serrated jaw with flat lower jaw
*Main line range 2.4" to #6 
*2.4"-.16" (61mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 1921.jpg
Eye with strain relief sleeve SAL 1921
Eye with strain relief sleeve
& oval eye		 SAL 4390
Mounted with strain relief sleeve SAL 1922
Hanger stud only SAL 1928 
2.4" Bronze - Acme thread:
*ASTM Grade 5, Class A, smooth jaw with flat lower jaw
*Main line range 2.4" to #6 
*2.4"-.16" (61mm-4mm) diameter
*400 RMS amps, 60Hz

Codes

 4295.jpg
Eye with strain relief sleeve SAL 4295
Eye without strain relief sleeve SAL 4311
Hanger studs for "C" clamps:
Used to hold one calamp of
a set while the other is being
installed on the de-energized
line. Hanger studs are not
designed or tested to carry
current

Codes

 hanger_studs.jpg
Hanger stud for aluminum "C" clamps 1", 1.25", 1.66" SAL 1928
Double hanger stud for "C"
clamps 1.25", 1.5", 2.4", 3.5"		 SAL 2427
Hanger stud for aluminum "C" clamps 1"
 		 SAL 2537
Hanger stud for 477 bronze "C" clamps SAL 2093
Hanger stud for brass "C"
clamps 1", 1.25", 2.4"		 SAL 9983
*Hanger stud for bronze "C"
clamps 1", 1.25", 2.4".
*For use with only plain ferrule clamps and threaded ferrule
clamps with a screw down
strain relief restraint system		 SAL 1754
 

Recently Visited Pages
Mountain Media ecommerce solutions Ecommerce Solutions by Mountain Media