Ball and Socket System

The ball and socket system allows for variable angle accessibility and us
compact and lightweight. There are fixed grounding points on the socket clamp

Socket Clamps
*Bronze alloy *ASTM Grade 5 *Socket size 1" *Threaded bore boss of 5/8" - 11 UNC *Continuous current rating: 400	Codes
With strain relief sleeve	SAL 21190
Without strain relief sleeve	SAL 21277

Ball studs: long and short ball studs are made from a copper alloy, tin plated. They have a 1/2" - 13 UNC x 2" thread and a recommended installation torque of 300 in.lbs. the short stud is used conventionally. the long stud can be used as a grounding point for "C" or Duckbill clamps that have a jaw width of 2.75" or less. ASTM Grade 5
	Codes
Ball stud, short	SAL 21191
Ball stud, long	SAL 21192
Internal thread ball stud: is tapped for a 1/2 - 13 UNC bolt having a length of at least 1"
	SAL 24082
Cover for Ball Stud: made from orange Salcor, the ball stud cover allows for multiple angle applications when installed using a clampstick.

	SAL 21236

Offset Nema Pad stud: made from a copper alloy, tin plated. They have the standard Nema bolt hole spacing and comes in short and long lengths
	Codes
90o offset Nema pad stud	SAL 21846
Nema pad stud, short	SAL 21228
Nema pad stud, long	SAL 24087