High Voltage Detectors and Kits
|
Salisbury self testing audio/visual voltage detectors are used to verify live or de-energized conductors. They may be used with rubber insulating gloves or hot sticks using the universal spline end fittings. Voltage testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three “C” batteries (included). These self-testing voltage detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly.
|
Voltage detector kits include the detector, shotgun adaptor and a storage/carrying case.
WARNING: Do not assume conductors that have been tested de-energized will
stay de-energized. Always install proper grounding devices before work. Failure
to do so may result in serious injury or death.
Settings phase to phase
|
Codes
|
|
|
Off /240v / 4.2kV / 15kV / 25kV/
35kV / 69kV / 115kV / 230kV
|
4544 |
|
Complete kit: detector,
adaptor, case |
4556 |
|
|
|
|
|
|
Off /240v / 4.2kV / 35kV / 69kV /
115kV / 230kV / 345kV / 500kV |
4644 |
|
Complete kit: detector,
adaptor, case |
4667 |
|
|
|
|
|
|
Off / Test-240v / battery /
URD: 15kV / 25kV / 35kV /
Overhead: 4.2kV / 15kV / 25kV /
35kV / 46kV / 69kV |
4744 |
|
Complete kit: detector,
adaptor, case |
4769 |
|
|
|
|
|
|
|
A+ Electrical Safety Equipment 