Dead Front Jumpers, Elbows

Dead front ground sets are supplied with an insulated grounding elbow, yellow jacketed
copper grounding cable, and a # 1815 bronze flat ground clamp for the ground con-
nection. Grounding elbows are equipped with arc quenching tips as provided on standard
load break elbows 

Both 15kV and 25kV elbows are available with connectors for 1/0 or 2/0 cable. Assembled
sets for 15kV and 25kV are available for single phase or three phase grounding requirements.
The fault duty rating for 100 amp grounding elbows is 10kA for 10 cycles oer IEEE 386.
Standard three phase sets have a 43 foot tail connecting to a # 2374 four wire connector
with 2 foot leads for the elbows.

Sets can be factory assembled to customer specifications.  

Assembled ground sets	Codes
15kV single phase, 6 ft 1/0 cable	SAL2962
15kV single phase, 6 ft 1/0 cable with storage bag	SAL 2961
15kV three phase, 6 ft 1/0 cable	SAL 22630
15kV three phase, 6 ft 1/0 cable with storage bag	SAL 2963
25kV single phase, 6 ft 1/0 cable	SAL 22631
25kV single phase, 6 ft 1/0 cable with storage bag	SAL 2971
25kV three phase, 6 ft 1/0 cable	SAL 22632
25kV three phase, 6 ft 1/0 cable with storage bag	SAL 2973
Insulated grounding elbows	Codes
15kV with 1/0 cable connector	SAL 2910
15kV with 2/0 cable connector	SAL 2912
25kV with 1/0 cable connector	SAL 2935
25kV with 2/0 cable connector	SAL 2936